The Linksys EA8300 is a MU-MIMO Tri-Band WiFi router, which has one 2.4GHz and two 5GHz WiFi Interfaces.
¶ Specifications
| Interface | 5 Ethernet 1Gbit ports 1 USB 3.0 port Reset button |
| CPU | Qualcomm IPQ4090 (ARM Cortex A7 - 4 Cores @ 717MHz) |
| Memory / Storage | 256MB RAM / 256MB NAND Flash |
| WLAN Hardware | Qualcomm Atheros IPQ4019, Qualcomm Atheros QCA9886 |
| Wi-Fi | WLAN1: IEEE 802.11abgn + ac, 2.4GHz, 5GHz WLAN2: IEEE 802.11an + ac, 5GHz |
| Power Input | 12V, 2A |
| Downloads | Meshmerize OS Upgrade Image* Meshmerize OS Factory Image * please read the following section (Installation) before proceeding to install Meshmerize OS |
¶ Installation
if you intend to flash Meshmerize OS into the Linksys EA8300 from factory settings you must first install the Meshmerize OS Factory Image. Otherwise you will probably run into a soft brick scenario. You can find an easy to follow step by step in this installation guide. Just take the Meshmerize OS Factory Image instead of the OpenWRT Factory Image.
If your device already has OpenWRT running on it, you can flash the Meshmerize OS Upgrade Image instead through the luci web interface or by using the command line