The Acksys RuggedAir100 is an industrial Wi-Fi access point designed to operate in challenging environments.
¶ Specifications
| Interfaces |
2-port Ethernet 10/100 auto-sensing,Base TX, auto MDI/MDIX, M12 D-coded Ethernet interface 1 radio 802.11n (MIMO 2T2R, 300 Mbps), ANI (Adaptive Noise Immunity) |
| CPU | Qualcomm Atheros QCA9558 SoC |
| Memory / Storage | 128MB DDR2 / 128MB NAND Flash |
| WiFi | WiFi 802.11n (MIMO 2T2R), 2.4/5 GHz |
| LEDs | 2 Power / 2 LAN / 1 System |
| Power Input | +9 VDC to +48 VDC |
| Operating Temperature | -40°C to +70°C |
| Dimensions / Weight |
without fixing plate: 225mm x 80mm x 75 mm / 775g with fixing plate: 175mm x 80mm x 75 mm / 970g |
| Certifications |
Environmental: IP66 Shocks & vibrations : EN 61373 (CAT 1 CLASS B) |
| Downloads |
¶ Installation
MeshmerizeOS can be directly installed through the Acksys WaveOS web UI or with WaveManager.
- Download the MeshmerizeOS Factory Image from the link above.
- Follow the instructions in the Acksys user guide for initially connecting to the device.
- In the web UI, go to Tools > Firmware Upgrade.
- Select the MeshmerizeOS Factory Image and continue with “Upload”
- On the next page, confirm the upgrade with the button “Upgrade now”
Smth about how LEDs look (airbox: “During the upgrade, the Power/Diag LED will flash red. Do not remove power from the device during the upgrade. The upgrade is complete when the LED changes to green.”)
¶ Reset
The reset button can be accessed by opening the cover. Please read the User guide before opening the device.
Reset → Short push (< 1 sec), anytime
Restore factory settings → Long push (> 2 sec) while operating
Enter emergency upgrade → Long push (> 2 sec) at startup