The Acksys RuggedAir1000 is an industrial Wi-Fi access point designed to operate in challenging environments.
¶ Specifications
| Interfaces | 2-port Gigabit Ethernet 10/100/1000 auto-sensing base T, auto MDI/MDIX cross-over, M12 X-coded connectors 1 radio 802.11ac (MIMO 3T3R, 1.3 Gbps), ANI (Adaptive Noise Immunity) |
| CPU | Qualcomm Atheros QCA9558 SoC |
| Memory / Storage | 128MB DDR2 / 128MB NAND Flash |
| WiFi | 802.11ac: MCS0-9, 3 streams (6.5 Mbps to 1.3 Gbps) |
| LEDs | 2 Power / 2 LAN / 1 System |
| Power Input | +12VDC to +36VDC isolated (24V EN50155 nominal), redundant, M12 connector 4-pole A-coded & PoE 802,3af (15,4W) |
| Operating Temperature | -40°C to +70°C |
| Dimensions / Weight | Compact enclosure L: 175 x l: 80 x h: 75 mm (without connectors), 850g |
| Certifications |
Environmental: IP66 Shocks & vibrations : EN 61373 (CAT 1 CLASS B) |
| Downloads |
¶ Installation
WaveOS with Meshmerize can be directly installed through the Acksys WaveOS web UI or with WaveManager.
- Download the WaveOS Factory Image from the link above.
- Follow the instructions in the Acksys user guide for initially connecting to the device.
- In the web UI, go to Tools > Firmware Upgrade.
- Select the MeshmerizeOS Factory Image and continue with “Upload”
- On the next page, confirm the upgrade with the button “Upgrade now”
Something about how LEDs look:(airbox: “During the upgrade, the Power/Diag LED will flash red. Do not remove power from the device during the upgrade. The upgrade is complete when the LED changes to green.”)