¶ Configuration on MeshmerizeOS UI
Follow these steps to enable and configure the Hive Worker directly through the device’s built-in Web UI (LuCI):
- Log in to the device’s Web UI (LuCI).
- Navigate to Network → Meshmerize.
- Switch to the Meshmerize Settings tab.
- In Hive worker settings, uncheck Disabled.
- Fill MQTT Server with your deployment URL (e.g.
mynetwork.hive.meshmerize.net). Make sure the URL does not includehttp://. - Click Save (or Save & Apply) to activate the Hive Worker.
