Robonode devices ship with Meshmerize fully integrated. No installation or command-line steps are required.
To bring up a minimal working mesh:
- Log into
http://192.168.1.1 (root / no password).
- Opens to Mesh Config. Here you can configure:
- Mesh SSID
- Mesh passphrase
- Channel and bandwidth
- Click SAVE & APPLY.
- Confirm neighbors appear in Mesh Status.
Your Robonode Meshmerize network is ready.
- Connect your computer to the Robonode via Ethernet.
- Ensure your computer is set to a
192.168.1.x address.
- Open a browser and navigate to:
http://192.168.1.1
- Log in using root with no password.
- You will land on the Mesh Config page.
For any questions please write to support@meshmerize.net